Replacing the toilet seat at home usually requires following the following steps:

Prepare tools and a new toilet seat: Before starting, please ensure that you have a new toilet seat of appropriate size and good quality. If the toilet seat does not match the size or color of the toilet, it may affect the user experience and aesthetics.

Dismantling the old toilet lid: There are usually two circular screws behind the toilet lid as fixing points. Sometimes these screws are covered by a cover plate, and the cover plate needs to be removed first, and then the screws need to be removed. Gently remove the old toilet seat cover.

Clean the edges of the toilet: Before installing a new toilet seat, clean the edges of the toilet to prepare for the installation of the new toilet seat.

Install new toilet seat: Align the new toilet seat with the edge of the toilet, ensuring that the hole is aligned with the fixed hole at the bottom of the toilet. Thread the screws through the holes on the toilet lid and bottom, and secure them with screw caps. Be careful not to tighten too tightly at the beginning, adjust while installing to ensure the toilet seat is installed correctly.

Check stability: After installation, gently shake the toilet lid to ensure it is securely fixed. If the toilet seat moves, it may be necessary to tighten the screws again.

Complete installation: After confirming that there are no errors, clean the installation site and keep the bathroom clean.

matters needing attention:

Before purchasing a new toilet seat, the size of the toilet should be measured to ensure that the new toilet seat can be installed correctly on the toilet.